Nylon shows both a high thermostability (temperature resistant from -40 °C to approx. +100 °C) and high stiffness, hardness and toughness. These are some of the main characteristics. Due to the fact, that the good mechanical characteristics will be achieved only after conditioning, this material must be conditioned again after annealing. In addition, this conditioning occurs with a longer storage in air automatically.
• high strength and stiffness
• high impact and notching impact strength
• high heat deflection temperature
• good at dampening
• good glide and damping ability
• good chemical stability against organic solvents and fuels
• size alteration by humidity absorption must be considered
• dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
Bearing parts (good sliding properties), gear wheels, pump parts, sliding rails, castors (reduction of the noise level), fittings.
ENGINEERING - Gears, cams, sprockets, bushes, bearings, gaskets, pulleys, liners.
TEXTILE - Loom pivot bearings, gears for loom and knitting machines, shuttles, rollers, cams, and cam followers.
METAL - Bearings, bearing cages, slipper pads, gears, bushes, wear strips, rollers, eccentric rollers, wobble box inserts.
MATERIAL HANDLING EQUIPMENTS - Cranes/Fork lifts/Conveyors, Ropeways
AUTOMOBILE - Wear rings, pads, swivel bushes, throttle linkages, bushes, shackle pin bushes
PAPER / SUGAR MILLS - Gears, bushes, pulleys, rollers bearings
BOTTLING & FOOD PROCESSING - Star wheels, scrolls, guides, cams, cam followers, rollers, timing screws
RAILWAYS - Bushes, wear plates
CHEMICAL - Balls, gaskets, liners, nuts & bolts
MARINE - Bushes, gears, rings, trunnion bearings, rollers and roller bearings stern
Very tough (also in cold condition), high hardness.
Polyamide with the highest hardness, rigidity, a good resistance to wear and heat deflection temperature.
Nylon 6 Oilon has a fine crystalline structure with non wear and tear and is selflubricating. The high resistance to wear and tear and the remarkable sliding properties can be further improved by adding oil, lubricants and stabilizers.
Nylon is mainly produces In either natural color or black color. Black nylon contains Molybdenum, dlsulphlde (commonly] known as MOS2), which can help with self lubrication In obscure areas and also can look aesthetically better In dlrtw environments.
• Diameter : from ¼" to 12"
• Size : 3OO mm & 1OOOmm in length
• Thickness : from 8mm to 1OOmm
• Size : 300mm, 6OO mm2- & 1OOO mm2
© 2016 All rights Reserved
